Universal Correlation between Cathode Roughness Factor and H2/Air Performance Losses in Voltage Cycling-Based Accelerated Stress Tests

Roberta K.F. Della Bella, Björn M. Stühmeier, Hubert A. Gasteiger

Research output: Contribution to journalArticlepeer-review

28 Scopus citations

Abstract

The loss of electrochemically active surface area (ECSA) in the cathode during load cycling remains a major durability issue for proton exchange membrane fuel cells (PEMFCs). Here, the degradation of low-loaded cathodes (0.1 mgPt cmMEA-2 ) was investigated by accelerated stress tests (ASTs) in H2/N2 configuration, varying the upper potential limit (UPL, 0.85-1.0 V) and the hold time (1, 2, or 8 s) of the square wave voltage cycling profiles. A full voltage loss analysis was performed at beginning-of-life and after 100, 300, 1 k, 2 k, 5 k, 10 k, 20 k, 50 k, 100 k, 200 k, and 500 k cycles, determining: (i) the roughness factor (rf) via CO-stripping; (ii) the H2-crossover; (iii) the cathode electrode's proton conduction resistance; (iv) the H2/O2 and H2/air performance; and, (v) the O2 transport resistance. It was found that the ECSA/rf deteriorates linearly vs the logarithm of the number of cycles or time at UPL, with higher slopes for harsher ASTs. The individual voltage losses were found to be either unaffected by the aging (H2-crossover and proton conduction resistance) or depend exclusively on the cathode rf (mass/specific activity and O2 transport resistances), independent of the AST procedure. This results in a universal correlation between H2/air performance and rf during voltage cycling ASTs.

Original languageEnglish
Article number044528
JournalJournal of the Electrochemical Society
Volume169
Issue number4
DOIs
StatePublished - 1 Apr 2022

Fingerprint

Dive into the research topics of 'Universal Correlation between Cathode Roughness Factor and H2/Air Performance Losses in Voltage Cycling-Based Accelerated Stress Tests'. Together they form a unique fingerprint.

Cite this