Simulation models for 3D inkjet printing - Material and process design

I. N. Kellner; M. F. Zaeh

Simulation models for 3D inkjet printing - Material and process design

I. N. Kellner
, M. F. Zaeh

Chair of Machine Tools and Manufacturing Technology

Technical University of Munich

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

Abstract

Due to the ability to produce complex parts with no need for pre-tooling, Additive Layer Manufacturing (ALM) is a future technology with 3D inkjet printing being one of them. The latter is based on the polymerization of a liquid dispensed into a powder bed. However, the special challenges which have to be met here are to increase product quality such as tensile strength und density on a repeatable base. Consequently multi-scale simulation models were developed to support material researchers as well as users of the technology in their daily work and therefore to contribute to process stability and material reliability of 3D printers and their products.

Original language	English
Pages	646-655
Number of pages	10
State	Published - 2010
Event	21st Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2010 - Austin, TX, United States Duration: 9 Aug 2010 → 11 Aug 2010

Conference

Conference	21st Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2010
Country/Territory	United States
City	Austin, TX
Period	9/08/10 → 11/08/10

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Cite this

@conference{4446cc0d0ab4473385423f6556cf118d,

title = "Simulation models for 3D inkjet printing - Material and process design",

abstract = "Due to the ability to produce complex parts with no need for pre-tooling, Additive Layer Manufacturing (ALM) is a future technology with 3D inkjet printing being one of them. The latter is based on the polymerization of a liquid dispensed into a powder bed. However, the special challenges which have to be met here are to increase product quality such as tensile strength und density on a repeatable base. Consequently multi-scale simulation models were developed to support material researchers as well as users of the technology in their daily work and therefore to contribute to process stability and material reliability of 3D printers and their products.",

author = "Kellner, \{I. N.\} and Zaeh, \{M. F.\}",

year = "2010",

language = "English",

pages = "646--655",

note = "21st Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2010 ; Conference date: 09-08-2010 Through 11-08-2010",

}

TY - CONF

T1 - Simulation models for 3D inkjet printing - Material and process design

AU - Kellner, I. N.

AU - Zaeh, M. F.

PY - 2010

Y1 - 2010

N2 - Due to the ability to produce complex parts with no need for pre-tooling, Additive Layer Manufacturing (ALM) is a future technology with 3D inkjet printing being one of them. The latter is based on the polymerization of a liquid dispensed into a powder bed. However, the special challenges which have to be met here are to increase product quality such as tensile strength und density on a repeatable base. Consequently multi-scale simulation models were developed to support material researchers as well as users of the technology in their daily work and therefore to contribute to process stability and material reliability of 3D printers and their products.

AB - Due to the ability to produce complex parts with no need for pre-tooling, Additive Layer Manufacturing (ALM) is a future technology with 3D inkjet printing being one of them. The latter is based on the polymerization of a liquid dispensed into a powder bed. However, the special challenges which have to be met here are to increase product quality such as tensile strength und density on a repeatable base. Consequently multi-scale simulation models were developed to support material researchers as well as users of the technology in their daily work and therefore to contribute to process stability and material reliability of 3D printers and their products.

UR - https://www.scopus.com/pages/publications/84898428269

M3 - Paper

AN - SCOPUS:84898428269

SP - 646

EP - 655

T2 - 21st Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2010

Y2 - 9 August 2010 through 11 August 2010

ER -

Simulation models for 3D inkjet printing - Material and process design

Abstract

Conference

UN SDGs

Other files and links

Fingerprint

Cite this