Pilot-scale anaerobic submerged membrane bioreactor (AnSMBR) treating municipal wastewater: The fouling phenomenon and long-term operation

  • D. Martinez-Sosa
  • , B. Helmreich
  • , T. Netter
  • , S. Paris
  • , F. Bischof
  • , H. Horn

Research output: Contribution to journalArticlepeer-review

25 Scopus citations

Abstract

An anaerobic submerged membrane bioreactor (AnSMBR) on pilot-scale treating a mixture composed of municipal wastewater and glucose under mesophilic temperature conditions was operated for 206 days. The performance of the AnSMBR was evaluated at different fluxes, biomass concentrations and gas sparging velocities (GSV). GSV was used to control fouling. In addition, the AnSMBR was operated in cycles that included relaxation and backwashing phases. The increase in the transmembrane pressure (fouling rate) was measured under different operational conditions and was used to evaluate the stability of the process. The fouling rate could be controlled for a long period of time at a flux of 7 l m-2 h-1 with a GSV of 62 m/h and an average biomass concentration of 14.8 g TSS/L. The membrane was physically cleaned after 156 days of operation. The cleaning efficiency was almost 100% indicating that no irreversible fouling was developed inside the pores of the membrane. The COD removal efficiency was close to 90%. As in anaerobic processes, nutrients were not exposed to degradation and almost no pathogens were found in the effluent, hence the effluent could be used for irrigation in agriculture.

Original languageEnglish
Pages (from-to)1804-1811
Number of pages8
JournalWater Science and Technology
Volume64
Issue number9
DOIs
StatePublished - 2011

Keywords

  • Anaerobic submerged membrane bioreactor
  • Anaerobic treatment of municipal wastewater
  • Critical and operational flux

Fingerprint

Dive into the research topics of 'Pilot-scale anaerobic submerged membrane bioreactor (AnSMBR) treating municipal wastewater: The fouling phenomenon and long-term operation'. Together they form a unique fingerprint.

Cite this