TY - JOUR
T1 - Observation of preferential sputtering of Si/graphite anodes from Li-ion cells by GD-OES and its validation by neutron depth profiling
AU - Pivarníková, Ivana
AU - Flügel, Marius
AU - Paul, Neelima
AU - Cannavo, Antonino
AU - Ceccio, Giovanni
AU - Vacík, Jiří
AU - Müller-Buschbaum, Peter
AU - Wohlfahrt-Mehrens, Margret
AU - Gilles, Ralph
AU - Waldmann, Thomas
N1 - Publisher Copyright:
© 2023 Elsevier B.V.
PY - 2024/2/28
Y1 - 2024/2/28
N2 - Although the loss of Li inventory (LLI) is a common aging mechanism in Li-ion batteries, there are only few methods capable of comprehensive depth profiling within the bulk of the electrode to locate the residual Li. Two post-mortem analytical methods, which can be used to obtain quantified Li depth profiles to depths greater than 10 μm from the electrode surface are neutron depth profiling (NDP) and glow discharge optical emission spectroscopy (GD-OES). In this work, the validation of GD-OES using NDP by examining the Si/graphite anodes of cylindrical 21,700 cells is presented. One anode was in a pristine/fresh state, two anodes were aged to the state of health (SOH) 90% and 76% at 45 °C respectively, and suffered from heavy solid electrolyte interphase (SEI) growth, and the fourth anode was aged to SOH 60% at 0 °C and exhibited Li plating. It is demonstrated that Li plating leads to a faster sputter rate of the Li-rich anode surface. An adapted method is introduced to incorporate the changing sputter rate into the depth profile calculation. For the aged anodes, the progressive aging of the anodes leads to a higher amount of irreversibly bound Li on the anode surface.
AB - Although the loss of Li inventory (LLI) is a common aging mechanism in Li-ion batteries, there are only few methods capable of comprehensive depth profiling within the bulk of the electrode to locate the residual Li. Two post-mortem analytical methods, which can be used to obtain quantified Li depth profiles to depths greater than 10 μm from the electrode surface are neutron depth profiling (NDP) and glow discharge optical emission spectroscopy (GD-OES). In this work, the validation of GD-OES using NDP by examining the Si/graphite anodes of cylindrical 21,700 cells is presented. One anode was in a pristine/fresh state, two anodes were aged to the state of health (SOH) 90% and 76% at 45 °C respectively, and suffered from heavy solid electrolyte interphase (SEI) growth, and the fourth anode was aged to SOH 60% at 0 °C and exhibited Li plating. It is demonstrated that Li plating leads to a faster sputter rate of the Li-rich anode surface. An adapted method is introduced to incorporate the changing sputter rate into the depth profile calculation. For the aged anodes, the progressive aging of the anodes leads to a higher amount of irreversibly bound Li on the anode surface.
KW - Aging mechanism
KW - Glow discharge optical emission spectroscopy (GD-OES)
KW - Lithium plating
KW - Lithium-ion batteries
KW - Neutron depth profiling (NDP)
KW - Post-mortem analysis
KW - SEI growth
KW - Si/graphite anodes
UR - http://www.scopus.com/inward/record.url?scp=85182896725&partnerID=8YFLogxK
U2 - 10.1016/j.jpowsour.2023.233972
DO - 10.1016/j.jpowsour.2023.233972
M3 - Article
AN - SCOPUS:85182896725
SN - 0378-7753
VL - 594
JO - Journal of Power Sources
JF - Journal of Power Sources
M1 - 233972
ER -