Novel three-phase CM/DM conducted emission separator

Marcelo Lobo Heldwein; Jürgen Biela; Hans Ertl; Thomas Nussbaumer; Johann W. Kolar

doi:10.1109/TIE.2009.2025287

Novel three-phase CM/DM conducted emission separator

Marcelo Lobo Heldwein, Jürgen Biela, Hans Ertl, Thomas Nussbaumer, Johann W. Kolar

Research output: Contribution to journal › Article › peer-review

35 Scopus citations

Abstract

This paper presents two novel three-phase common-mode (CM)/ differential-mode (DM) noise separation networks, which are passive and active networks, to be used in electromagnetic compatibility conducted emission (CE) measurements of three-phase equipment. The passive network is analyzed theoretically, and a prototype is constructed and tested. Its evaluation is presented through frequency response measurements and CE tests performed on a three-phase motor drive and verifies that the network is capable of separating the CM and DM information in a CE measurement condition.

Original language	English
Pages (from-to)	3693-3703
Number of pages	11
Journal	IEEE Transactions on Industrial Electronics
Volume	56
Issue number	9
DOIs	https://doi.org/10.1109/TIE.2009.2025287
State	Published - 2009
Externally published	Yes

Keywords

Conducted emissions (CEs)
EMC test setup
Electromagnetic compatibility (EMC) measurements
Noise separator

Access to Document

10.1109/TIE.2009.2025287

Cite this

@article{b731d00bb626462cb34d529d210269f3,

title = "Novel three-phase CM/DM conducted emission separator",

abstract = "This paper presents two novel three-phase common-mode (CM)/ differential-mode (DM) noise separation networks, which are passive and active networks, to be used in electromagnetic compatibility conducted emission (CE) measurements of three-phase equipment. The passive network is analyzed theoretically, and a prototype is constructed and tested. Its evaluation is presented through frequency response measurements and CE tests performed on a three-phase motor drive and verifies that the network is capable of separating the CM and DM information in a CE measurement condition.",

keywords = "Conducted emissions (CEs), EMC test setup, Electromagnetic compatibility (EMC) measurements, Noise separator",

author = "Heldwein, {Marcelo Lobo} and J{\"u}rgen Biela and Hans Ertl and Thomas Nussbaumer and Kolar, {Johann W.}",

year = "2009",

doi = "10.1109/TIE.2009.2025287",

language = "English",

volume = "56",

pages = "3693--3703",

journal = "IEEE Transactions on Industrial Electronics",

issn = "0278-0046",

publisher = "IEEE Industrial Electronics Society",

number = "9",

}

TY - JOUR

T1 - Novel three-phase CM/DM conducted emission separator

AU - Heldwein, Marcelo Lobo

AU - Biela, Jürgen

AU - Ertl, Hans

AU - Nussbaumer, Thomas

AU - Kolar, Johann W.

PY - 2009

Y1 - 2009

N2 - This paper presents two novel three-phase common-mode (CM)/ differential-mode (DM) noise separation networks, which are passive and active networks, to be used in electromagnetic compatibility conducted emission (CE) measurements of three-phase equipment. The passive network is analyzed theoretically, and a prototype is constructed and tested. Its evaluation is presented through frequency response measurements and CE tests performed on a three-phase motor drive and verifies that the network is capable of separating the CM and DM information in a CE measurement condition.

AB - This paper presents two novel three-phase common-mode (CM)/ differential-mode (DM) noise separation networks, which are passive and active networks, to be used in electromagnetic compatibility conducted emission (CE) measurements of three-phase equipment. The passive network is analyzed theoretically, and a prototype is constructed and tested. Its evaluation is presented through frequency response measurements and CE tests performed on a three-phase motor drive and verifies that the network is capable of separating the CM and DM information in a CE measurement condition.

KW - Conducted emissions (CEs)

KW - EMC test setup

KW - Electromagnetic compatibility (EMC) measurements

KW - Noise separator

UR - http://www.scopus.com/inward/record.url?scp=69349090419&partnerID=8YFLogxK

U2 - 10.1109/TIE.2009.2025287

DO - 10.1109/TIE.2009.2025287

M3 - Article

AN - SCOPUS:69349090419

SN - 0278-0046

VL - 56

SP - 3693

EP - 3703

JO - IEEE Transactions on Industrial Electronics

JF - IEEE Transactions on Industrial Electronics

IS - 9

ER -

Novel three-phase CM/DM conducted emission separator

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this