Model-based Systems Engineering Process for Supporting Variant Selection in the Early Product Development Phase

H. Li; M. Zou; D. Weidmann; S. A. Cheaib; M. Mortl; B. Vogel-Heuser

doi:10.1109/IEEM44572.2019.8978662

Model-based Systems Engineering Process for Supporting Variant Selection in the Early Product Development Phase

H. Li, M. Zou, D. Weidmann, S. A. Cheaib, M. Mortl, B. Vogel-Heuser

Technical University of Munich

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

9 Scopus citations

Abstract

Combining the benefits of model-based systems engineering (MBSE) and product line engineering (PLE), model-based product line engineering (MB-PLE) is applied for the design and development of complex product line systems with variants. However, due to limitations such as visualization complexity and lack of support for variant selection, MB-PLE is still not widely applied in the manufacturing industry. In this paper, we propose a model-based systems engineering process in the early development phase to promote the application of MB-PLE in the manufacturing industry. Through the integration of PSS planning model, SysML4Mechatronics modeling language and an optimal variant selection approach, the proposed process facilitates the modeling of a product line system and supports variant selection as well as architecture verification. The feasibility of the proposed systems engineering process is demonstrated with a case study.

Original language	English
Title of host publication	2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019
Publisher	IEEE Computer Society
Pages	637-643
Number of pages	7
ISBN (Electronic)	9781728138046
DOIs	https://doi.org/10.1109/IEEM44572.2019.8978662
State	Published - Dec 2019
Event	2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019 - Macao, Macao Duration: 15 Dec 2019 → 18 Dec 2019

Publication series

Name	IEEE International Conference on Industrial Engineering and Engineering Management
ISSN (Print)	2157-3611
ISSN (Electronic)	2157-362X

Conference

Conference	2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019
Country/Territory	Macao
City	Macao
Period	15/12/19 → 18/12/19

Keywords

Model-based product line engineering
PSS planning model
SysML4Mechatronics
Systems engineering process
Variant selection

Access to Document

10.1109/IEEM44572.2019.8978662

Cite this

Li, H., Zou, M., Weidmann, D., Cheaib, S. A., Mortl, M., & Vogel-Heuser, B. (2019). Model-based Systems Engineering Process for Supporting Variant Selection in the Early Product Development Phase. In 2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019 (pp. 637-643). Article 8978662 (IEEE International Conference on Industrial Engineering and Engineering Management). IEEE Computer Society. https://doi.org/10.1109/IEEM44572.2019.8978662

Li, H. ; Zou, M. ; Weidmann, D. et al. / Model-based Systems Engineering Process for Supporting Variant Selection in the Early Product Development Phase. 2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019. IEEE Computer Society, 2019. pp. 637-643 (IEEE International Conference on Industrial Engineering and Engineering Management).

@inproceedings{73c36983229547169fa7b47c69c576fe,

title = "Model-based Systems Engineering Process for Supporting Variant Selection in the Early Product Development Phase",

abstract = "Combining the benefits of model-based systems engineering (MBSE) and product line engineering (PLE), model-based product line engineering (MB-PLE) is applied for the design and development of complex product line systems with variants. However, due to limitations such as visualization complexity and lack of support for variant selection, MB-PLE is still not widely applied in the manufacturing industry. In this paper, we propose a model-based systems engineering process in the early development phase to promote the application of MB-PLE in the manufacturing industry. Through the integration of PSS planning model, SysML4Mechatronics modeling language and an optimal variant selection approach, the proposed process facilitates the modeling of a product line system and supports variant selection as well as architecture verification. The feasibility of the proposed systems engineering process is demonstrated with a case study.",

keywords = "Model-based product line engineering, PSS planning model, SysML4Mechatronics, Systems engineering process, Variant selection",

author = "H. Li and M. Zou and D. Weidmann and Cheaib, {S. A.} and M. Mortl and B. Vogel-Heuser",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019 ; Conference date: 15-12-2019 Through 18-12-2019",

year = "2019",

month = dec,

doi = "10.1109/IEEM44572.2019.8978662",

language = "English",

series = "IEEE International Conference on Industrial Engineering and Engineering Management",

publisher = "IEEE Computer Society",

pages = "637--643",

booktitle = "2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019",

}

Li, H, Zou, M, Weidmann, D, Cheaib, SA, Mortl, M & Vogel-Heuser, B 2019, Model-based Systems Engineering Process for Supporting Variant Selection in the Early Product Development Phase. in 2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019., 8978662, IEEE International Conference on Industrial Engineering and Engineering Management, IEEE Computer Society, pp. 637-643, 2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019, Macao, Macao, 15/12/19. https://doi.org/10.1109/IEEM44572.2019.8978662

Model-based Systems Engineering Process for Supporting Variant Selection in the Early Product Development Phase. / Li, H.; Zou, M.; Weidmann, D. et al.
2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019. IEEE Computer Society, 2019. p. 637-643 8978662 (IEEE International Conference on Industrial Engineering and Engineering Management).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Model-based Systems Engineering Process for Supporting Variant Selection in the Early Product Development Phase

AU - Li, H.

AU - Zou, M.

AU - Weidmann, D.

AU - Cheaib, S. A.

AU - Mortl, M.

AU - Vogel-Heuser, B.

PY - 2019/12

Y1 - 2019/12

N2 - Combining the benefits of model-based systems engineering (MBSE) and product line engineering (PLE), model-based product line engineering (MB-PLE) is applied for the design and development of complex product line systems with variants. However, due to limitations such as visualization complexity and lack of support for variant selection, MB-PLE is still not widely applied in the manufacturing industry. In this paper, we propose a model-based systems engineering process in the early development phase to promote the application of MB-PLE in the manufacturing industry. Through the integration of PSS planning model, SysML4Mechatronics modeling language and an optimal variant selection approach, the proposed process facilitates the modeling of a product line system and supports variant selection as well as architecture verification. The feasibility of the proposed systems engineering process is demonstrated with a case study.

AB - Combining the benefits of model-based systems engineering (MBSE) and product line engineering (PLE), model-based product line engineering (MB-PLE) is applied for the design and development of complex product line systems with variants. However, due to limitations such as visualization complexity and lack of support for variant selection, MB-PLE is still not widely applied in the manufacturing industry. In this paper, we propose a model-based systems engineering process in the early development phase to promote the application of MB-PLE in the manufacturing industry. Through the integration of PSS planning model, SysML4Mechatronics modeling language and an optimal variant selection approach, the proposed process facilitates the modeling of a product line system and supports variant selection as well as architecture verification. The feasibility of the proposed systems engineering process is demonstrated with a case study.

KW - Model-based product line engineering

KW - PSS planning model

KW - SysML4Mechatronics

KW - Systems engineering process

KW - Variant selection

UR - http://www.scopus.com/inward/record.url?scp=85079687011&partnerID=8YFLogxK

U2 - 10.1109/IEEM44572.2019.8978662

DO - 10.1109/IEEM44572.2019.8978662

M3 - Conference contribution

AN - SCOPUS:85079687011

T3 - IEEE International Conference on Industrial Engineering and Engineering Management

SP - 637

EP - 643

BT - 2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019

PB - IEEE Computer Society

T2 - 2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019

Y2 - 15 December 2019 through 18 December 2019

ER -

Li H, Zou M, Weidmann D, Cheaib SA, Mortl M , Vogel-Heuser B. Model-based Systems Engineering Process for Supporting Variant Selection in the Early Product Development Phase. In 2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019. IEEE Computer Society. 2019. p. 637-643. 8978662. (IEEE International Conference on Industrial Engineering and Engineering Management). doi: 10.1109/IEEM44572.2019.8978662

Model-based Systems Engineering Process for Supporting Variant Selection in the Early Product Development Phase

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this