Integrated design and assembly planning

G. Reinhart; C. Woenckhaus; G. Reinhrt; J. Milberg

doi:10.1109/CIMAT.1994.389095

Integrated design and assembly planning

G. Reinhart
, C. Woenckhaus
, G. Reinhrt
, J. Milberg

TUM Emeriti of Excellence

Institute for Machine Tools and Industrial Engineering (iwb)
Technical University of Munich

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This paper discusses an approach to reduce development times in design, assembly planning and assembly. This is done by the development of synchronized organization forms, powerful software tools and a flexible assembly system. After a short introduction the current situation is described. From this the most important targets will be derived and finally a specific solution will be presented.

Original language	English
Title of host publication	Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	47-52
Number of pages	6
ISBN (Electronic)	0818665106, 9780818665103
DOIs	https://doi.org/10.1109/CIMAT.1994.389095
State	Published - 1994
Event	4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994 - Troy, United States Duration: 10 Oct 1994 → 12 Oct 1994

Publication series

Name	Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994

Conference

Conference	4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994
Country/Territory	United States
City	Troy
Period	10/10/94 → 12/10/94

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

10.1109/CIMAT.1994.389095

Cite this

Reinhart, G., Woenckhaus, C., Reinhrt, G., & Milberg, J. (1994). Integrated design and assembly planning. In Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994 (pp. 47-52). Article 389095 (Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CIMAT.1994.389095

Reinhart, G. ; Woenckhaus, C. ; Reinhrt, G. et al. / Integrated design and assembly planning. Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994. Institute of Electrical and Electronics Engineers Inc., 1994. pp. 47-52 (Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994).

@inproceedings{f108dd64d00f470f832ed6d7043b352d,

title = "Integrated design and assembly planning",

abstract = "This paper discusses an approach to reduce development times in design, assembly planning and assembly. This is done by the development of synchronized organization forms, powerful software tools and a flexible assembly system. After a short introduction the current situation is described. From this the most important targets will be derived and finally a specific solution will be presented.",

author = "G. Reinhart and C. Woenckhaus and G. Reinhrt and J. Milberg",

note = "Publisher Copyright: {\textcopyright} 1994 IEEE.; 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994 ; Conference date: 10-10-1994 Through 12-10-1994",

year = "1994",

doi = "10.1109/CIMAT.1994.389095",

language = "English",

series = "Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "47--52",

booktitle = "Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994",

}

Reinhart, G, Woenckhaus, C, Reinhrt, G & Milberg, J 1994, Integrated design and assembly planning. in Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994., 389095, Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994, Institute of Electrical and Electronics Engineers Inc., pp. 47-52, 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994, Troy, United States, 10/10/94. https://doi.org/10.1109/CIMAT.1994.389095

Integrated design and assembly planning. / Reinhart, G.; Woenckhaus, C.; Reinhrt, G. et al.
Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994. Institute of Electrical and Electronics Engineers Inc., 1994. p. 47-52 389095 (Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Integrated design and assembly planning

AU - Reinhart, G.

AU - Woenckhaus, C.

AU - Reinhrt, G.

AU - Milberg, J.

PY - 1994

Y1 - 1994

N2 - This paper discusses an approach to reduce development times in design, assembly planning and assembly. This is done by the development of synchronized organization forms, powerful software tools and a flexible assembly system. After a short introduction the current situation is described. From this the most important targets will be derived and finally a specific solution will be presented.

AB - This paper discusses an approach to reduce development times in design, assembly planning and assembly. This is done by the development of synchronized organization forms, powerful software tools and a flexible assembly system. After a short introduction the current situation is described. From this the most important targets will be derived and finally a specific solution will be presented.

UR - https://www.scopus.com/pages/publications/85063413444

U2 - 10.1109/CIMAT.1994.389095

DO - 10.1109/CIMAT.1994.389095

M3 - Conference contribution

AN - SCOPUS:85063413444

T3 - Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994

SP - 47

EP - 52

BT - Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994

Y2 - 10 October 1994 through 12 October 1994

ER -

Reinhart G, Woenckhaus C, Reinhrt G, Milberg J. Integrated design and assembly planning. In Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994. Institute of Electrical and Electronics Engineers Inc. 1994. p. 47-52. 389095. (Proceedings of the 4th International Conference on Computer Integrated Manufacturing and Automation Technology, CIMAT 1994). doi: 10.1109/CIMAT.1994.389095

Integrated design and assembly planning

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this