Fabrication, characterization and modeling of flexible electronic components based on CNT networks

Paolo Lugli; Alaa Abdellah; Ahmed Abdelhalim; Andreas Albrecht; Markus Becherer; Engin Cagatay; Simone Colasanti; Aniello Falco; Florin Loghin; Sara El-Molla; Jose F. Salmeron; Almudena Rivadeneyra

doi:10.1109/ISCAS.2016.7527502

Fabrication, characterization and modeling of flexible electronic components based on CNT networks

Paolo Lugli, Alaa Abdellah, Ahmed Abdelhalim, Andreas Albrecht, Markus Becherer, Engin Cagatay, Simone Colasanti, Aniello Falco, Florin Loghin, Sara El-Molla, Jose F. Salmeron, Almudena Rivadeneyra

Computation, Information and Technology

Technical University of Munich

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

In this contribution, we will present a modeling approach based on a stochastic algorithm that can generate non-rigid solid objects in a three-dimensional space, emulating with high fidelity the typical fabrication processes involved (i.e. spray-coating). A randomly generated set of tube segments and tube junctions is converted into a netlist and the overall electrical behavior is computed via a SPICE software. The theoretical results agree well with experimental data and provide valuable details on the operation mode of the fabricated devices. In addition, we will discuss the characteristics of CNT films prepared by scalable spray deposition as well as inkjet printing onto rigid and flexible substrates. The performance of a variety of devices (e.g. pressure, temperature and gas sensors; FETs) will be described.

Original language	English
Title of host publication	ISCAS 2016 - IEEE International Symposium on Circuits and Systems
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1362-1365
Number of pages	4
ISBN (Electronic)	9781479953400
DOIs	https://doi.org/10.1109/ISCAS.2016.7527502
State	Published - 29 Jul 2016
Event	2016 IEEE International Symposium on Circuits and Systems, ISCAS 2016 - Montreal, Canada Duration: 22 May 2016 → 25 May 2016

Publication series

Name	Proceedings - IEEE International Symposium on Circuits and Systems
Volume	2016-July
ISSN (Print)	0271-4310

Conference

Conference	2016 IEEE International Symposium on Circuits and Systems, ISCAS 2016
Country/Territory	Canada
City	Montreal
Period	22/05/16 → 25/05/16

Keywords

inkjet printing
sensors
spray deposition
thin film transistors

Access to Document

10.1109/ISCAS.2016.7527502

Cite this

Lugli, P., Abdellah, A., Abdelhalim, A., Albrecht, A., Becherer, M., Cagatay, E., Colasanti, S., Falco, A., Loghin, F., El-Molla, S., Salmeron, J. F., & Rivadeneyra, A. (2016). Fabrication, characterization and modeling of flexible electronic components based on CNT networks. In ISCAS 2016 - IEEE International Symposium on Circuits and Systems (pp. 1362-1365). Article 7527502 (Proceedings - IEEE International Symposium on Circuits and Systems; Vol. 2016-July). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISCAS.2016.7527502

Lugli, Paolo ; Abdellah, Alaa ; Abdelhalim, Ahmed et al. / Fabrication, characterization and modeling of flexible electronic components based on CNT networks. ISCAS 2016 - IEEE International Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 1362-1365 (Proceedings - IEEE International Symposium on Circuits and Systems).

@inproceedings{913a1cd79ae74620b53882192a85390d,

title = "Fabrication, characterization and modeling of flexible electronic components based on CNT networks",

abstract = "In this contribution, we will present a modeling approach based on a stochastic algorithm that can generate non-rigid solid objects in a three-dimensional space, emulating with high fidelity the typical fabrication processes involved (i.e. spray-coating). A randomly generated set of tube segments and tube junctions is converted into a netlist and the overall electrical behavior is computed via a SPICE software. The theoretical results agree well with experimental data and provide valuable details on the operation mode of the fabricated devices. In addition, we will discuss the characteristics of CNT films prepared by scalable spray deposition as well as inkjet printing onto rigid and flexible substrates. The performance of a variety of devices (e.g. pressure, temperature and gas sensors; FETs) will be described.",

keywords = "inkjet printing, sensors, spray deposition, thin film transistors",

author = "Paolo Lugli and Alaa Abdellah and Ahmed Abdelhalim and Andreas Albrecht and Markus Becherer and Engin Cagatay and Simone Colasanti and Aniello Falco and Florin Loghin and Sara El-Molla and Salmeron, {Jose F.} and Almudena Rivadeneyra",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; 2016 IEEE International Symposium on Circuits and Systems, ISCAS 2016 ; Conference date: 22-05-2016 Through 25-05-2016",

year = "2016",

month = jul,

day = "29",

doi = "10.1109/ISCAS.2016.7527502",

language = "English",

series = "Proceedings - IEEE International Symposium on Circuits and Systems",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "1362--1365",

booktitle = "ISCAS 2016 - IEEE International Symposium on Circuits and Systems",

}

Lugli, P, Abdellah, A, Abdelhalim, A, Albrecht, A, Becherer, M, Cagatay, E, Colasanti, S, Falco, A, Loghin, F, El-Molla, S, Salmeron, JF & Rivadeneyra, A 2016, Fabrication, characterization and modeling of flexible electronic components based on CNT networks. in ISCAS 2016 - IEEE International Symposium on Circuits and Systems., 7527502, Proceedings - IEEE International Symposium on Circuits and Systems, vol. 2016-July, Institute of Electrical and Electronics Engineers Inc., pp. 1362-1365, 2016 IEEE International Symposium on Circuits and Systems, ISCAS 2016, Montreal, Canada, 22/05/16. https://doi.org/10.1109/ISCAS.2016.7527502

Fabrication, characterization and modeling of flexible electronic components based on CNT networks. / Lugli, Paolo; Abdellah, Alaa; Abdelhalim, Ahmed et al.
ISCAS 2016 - IEEE International Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers Inc., 2016. p. 1362-1365 7527502 (Proceedings - IEEE International Symposium on Circuits and Systems; Vol. 2016-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Fabrication, characterization and modeling of flexible electronic components based on CNT networks

AU - Lugli, Paolo

AU - Abdellah, Alaa

AU - Abdelhalim, Ahmed

AU - Albrecht, Andreas

AU - Becherer, Markus

AU - Cagatay, Engin

AU - Colasanti, Simone

AU - Falco, Aniello

AU - Loghin, Florin

AU - El-Molla, Sara

AU - Salmeron, Jose F.

AU - Rivadeneyra, Almudena

PY - 2016/7/29

Y1 - 2016/7/29

N2 - In this contribution, we will present a modeling approach based on a stochastic algorithm that can generate non-rigid solid objects in a three-dimensional space, emulating with high fidelity the typical fabrication processes involved (i.e. spray-coating). A randomly generated set of tube segments and tube junctions is converted into a netlist and the overall electrical behavior is computed via a SPICE software. The theoretical results agree well with experimental data and provide valuable details on the operation mode of the fabricated devices. In addition, we will discuss the characteristics of CNT films prepared by scalable spray deposition as well as inkjet printing onto rigid and flexible substrates. The performance of a variety of devices (e.g. pressure, temperature and gas sensors; FETs) will be described.

AB - In this contribution, we will present a modeling approach based on a stochastic algorithm that can generate non-rigid solid objects in a three-dimensional space, emulating with high fidelity the typical fabrication processes involved (i.e. spray-coating). A randomly generated set of tube segments and tube junctions is converted into a netlist and the overall electrical behavior is computed via a SPICE software. The theoretical results agree well with experimental data and provide valuable details on the operation mode of the fabricated devices. In addition, we will discuss the characteristics of CNT films prepared by scalable spray deposition as well as inkjet printing onto rigid and flexible substrates. The performance of a variety of devices (e.g. pressure, temperature and gas sensors; FETs) will be described.

KW - inkjet printing

KW - sensors

KW - spray deposition

KW - thin film transistors

UR - http://www.scopus.com/inward/record.url?scp=84983389889&partnerID=8YFLogxK

U2 - 10.1109/ISCAS.2016.7527502

DO - 10.1109/ISCAS.2016.7527502

M3 - Conference contribution

AN - SCOPUS:84983389889

T3 - Proceedings - IEEE International Symposium on Circuits and Systems

SP - 1362

EP - 1365

BT - ISCAS 2016 - IEEE International Symposium on Circuits and Systems

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2016 IEEE International Symposium on Circuits and Systems, ISCAS 2016

Y2 - 22 May 2016 through 25 May 2016

ER -

Lugli P, Abdellah A, Abdelhalim A, Albrecht A, Becherer M, Cagatay E et al. Fabrication, characterization and modeling of flexible electronic components based on CNT networks. In ISCAS 2016 - IEEE International Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers Inc. 2016. p. 1362-1365. 7527502. (Proceedings - IEEE International Symposium on Circuits and Systems). doi: 10.1109/ISCAS.2016.7527502

Fabrication, characterization and modeling of flexible electronic components based on CNT networks

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this