Estimating the parameters of induction machines at standstill

Cursino Brandão Jacobina; João Edgar Chaves Filho; Antonio Marcus Nogueira Lima

doi:10.1109/60.986442

Estimating the parameters of induction machines at standstill

Cursino Brandão Jacobina, João Edgar Chaves Filho, Antonio Marcus Nogueira Lima

Research output: Contribution to journal › Article › peer-review

37 Scopus citations

Abstract

This paper presents a method to determine the continuous-time parameters of induction machines which are necessary to implement the field-oriented control strategy. This method does not require the use of any mechanical devices or speed measurement sensor and it is conceived to be used during the auto-commissioning of the drive-system. The estimation of the stator resistance is based on the dynamic model of the machine considering that the variables are dc quantities. The estimation of the stator transient inductance, the stator inductance, and the rotor time constant, are based on the dynamic model of the machine. The experimental results which are presented demonstrate the feasibility of the proposed method.

Original language	English
Pages (from-to)	85-89
Number of pages	5
Journal	IEEE Transactions on Energy Conversion
Volume	17
Issue number	1
DOIs	https://doi.org/10.1109/60.986442
State	Published - Mar 2002
Externally published	Yes

Keywords

Induction machine
Parameter estimation

Access to Document

10.1109/60.986442

Cite this

@article{b1f7381aeeba4aeabeef541703654bc7,

title = "Estimating the parameters of induction machines at standstill",

abstract = "This paper presents a method to determine the continuous-time parameters of induction machines which are necessary to implement the field-oriented control strategy. This method does not require the use of any mechanical devices or speed measurement sensor and it is conceived to be used during the auto-commissioning of the drive-system. The estimation of the stator resistance is based on the dynamic model of the machine considering that the variables are dc quantities. The estimation of the stator transient inductance, the stator inductance, and the rotor time constant, are based on the dynamic model of the machine. The experimental results which are presented demonstrate the feasibility of the proposed method.",

keywords = "Induction machine, Parameter estimation",

author = "Jacobina, {Cursino Brand{\~a}o} and {Chaves Filho}, {Jo{\~a}o Edgar} and Lima, {Antonio Marcus Nogueira}",

note = "Funding Information: Manuscript received November 19, 1999. This work was supported in part by the Conselho National de Desenvolvimento Cient{\'i}fico e Tecnol{\'o}gico (CNPq) and the Funda{\c c}{\~a}o Coordena{\c c}{\~a}o de Aperfei{\c c}oamento de Pessoal de N{\'i}vel Superior (CAPES).",

year = "2002",

month = mar,

doi = "10.1109/60.986442",

language = "English",

volume = "17",

pages = "85--89",

journal = "IEEE Transactions on Energy Conversion",

issn = "0885-8969",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "1",

}

TY - JOUR

T1 - Estimating the parameters of induction machines at standstill

AU - Jacobina, Cursino Brandão

AU - Chaves Filho, João Edgar

AU - Lima, Antonio Marcus Nogueira

N1 - Funding Information: Manuscript received November 19, 1999. This work was supported in part by the Conselho National de Desenvolvimento Científico e Tecnológico (CNPq) and the Fundação Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES).

PY - 2002/3

Y1 - 2002/3

N2 - This paper presents a method to determine the continuous-time parameters of induction machines which are necessary to implement the field-oriented control strategy. This method does not require the use of any mechanical devices or speed measurement sensor and it is conceived to be used during the auto-commissioning of the drive-system. The estimation of the stator resistance is based on the dynamic model of the machine considering that the variables are dc quantities. The estimation of the stator transient inductance, the stator inductance, and the rotor time constant, are based on the dynamic model of the machine. The experimental results which are presented demonstrate the feasibility of the proposed method.

AB - This paper presents a method to determine the continuous-time parameters of induction machines which are necessary to implement the field-oriented control strategy. This method does not require the use of any mechanical devices or speed measurement sensor and it is conceived to be used during the auto-commissioning of the drive-system. The estimation of the stator resistance is based on the dynamic model of the machine considering that the variables are dc quantities. The estimation of the stator transient inductance, the stator inductance, and the rotor time constant, are based on the dynamic model of the machine. The experimental results which are presented demonstrate the feasibility of the proposed method.

KW - Induction machine

KW - Parameter estimation

UR - http://www.scopus.com/inward/record.url?scp=0036494482&partnerID=8YFLogxK

U2 - 10.1109/60.986442

DO - 10.1109/60.986442

M3 - Article

AN - SCOPUS:0036494482

SN - 0885-8969

VL - 17

SP - 85

EP - 89

JO - IEEE Transactions on Energy Conversion

JF - IEEE Transactions on Energy Conversion

IS - 1

ER -

Estimating the parameters of induction machines at standstill

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this