TY - JOUR
T1 - Device simulation of all-perovskite four-terminal tandem solar cells
T2 - Towards 33% efficiency
AU - Singh, Ajay
AU - Gagliardi, Alessio
N1 - Publisher Copyright:
© A. Singh and A. Gagliardi, Published by EDP Sciences, 2021.
PY - 2021
Y1 - 2021
N2 - Inorganic-organic hybrid perovskites offer wide optical absorption, long charge carrier diffusion length, and high optical-to-electrical conversion, enabling more than 25% efficiency of single-junction perovskite solar cells. All-perovskite four-terminal (4T) tandem solar cells have gained great attention because of solution-processability and potentially high efficiency without a need for current-matching between subcells. To make the best use of a tandem architecture, the subcell bandgaps and thicknesses must be optimized. This study presents a drift-diffusion simulation model to find optimum device parameters for a 4T tandem cell exceeding 33% of efficiency. Optimized subcell bandgaps and thicknesses, contact workfunctions, charge transport layer doping and perovskite surface modification are investigated for all-perovskite 4T tandem solar cells. Also, using real material and device parameters, the impact of bulk and interface traps is investigated. It is observed that, despite high recombination losses, the 4T device can achieve very high efficiencies for a broad range of bandgap combinations. We obtained the best efficiency for top and bottom cell bandgaps close to 1.55 eV and 0.9 eV, respectively. The optimum thickness of the top and bottom cells are found to be about 250 nm and 450 nm, respectively. Furthermore, we investigated that doping in the hole transport layers in both the subcells can significantly improve tandem cell efficiency. The present study will provide the experimentalists an optimum device with optimized bandgaps, thicknesses, contact workfunctions, perovskite surface modification and doping in subcells, enabling high-efficiency all-perovskite 4T tandem solar cells.
AB - Inorganic-organic hybrid perovskites offer wide optical absorption, long charge carrier diffusion length, and high optical-to-electrical conversion, enabling more than 25% efficiency of single-junction perovskite solar cells. All-perovskite four-terminal (4T) tandem solar cells have gained great attention because of solution-processability and potentially high efficiency without a need for current-matching between subcells. To make the best use of a tandem architecture, the subcell bandgaps and thicknesses must be optimized. This study presents a drift-diffusion simulation model to find optimum device parameters for a 4T tandem cell exceeding 33% of efficiency. Optimized subcell bandgaps and thicknesses, contact workfunctions, charge transport layer doping and perovskite surface modification are investigated for all-perovskite 4T tandem solar cells. Also, using real material and device parameters, the impact of bulk and interface traps is investigated. It is observed that, despite high recombination losses, the 4T device can achieve very high efficiencies for a broad range of bandgap combinations. We obtained the best efficiency for top and bottom cell bandgaps close to 1.55 eV and 0.9 eV, respectively. The optimum thickness of the top and bottom cells are found to be about 250 nm and 450 nm, respectively. Furthermore, we investigated that doping in the hole transport layers in both the subcells can significantly improve tandem cell efficiency. The present study will provide the experimentalists an optimum device with optimized bandgaps, thicknesses, contact workfunctions, perovskite surface modification and doping in subcells, enabling high-efficiency all-perovskite 4T tandem solar cells.
KW - Contact workfunction
KW - Doping
KW - Drift-diffusion
KW - Four-terminal tandem
KW - Perovskite solar cell
KW - Surface modification
KW - Trap-assisted recombination
UR - http://www.scopus.com/inward/record.url?scp=85118775300&partnerID=8YFLogxK
U2 - 10.1051/epjpv/2021004
DO - 10.1051/epjpv/2021004
M3 - Article
AN - SCOPUS:85118775300
SN - 2105-0716
VL - 12
JO - EPJ Photovoltaics
JF - EPJ Photovoltaics
M1 - 4
ER -