Comparison of different modelling techniques for longitudinally invariant integrated optical waveguides

D. De Zutter; P. Lagasse; J. Buus; T. P. Young; B. M. Dillon; H. P. Nolting; C. Weinert; P. Di Vita; M. Potenza; P. A. Besse; J. S. Gu; A. Galtarossa; C. G. Someda; M. C. Amann; B. Borchert; N. H.G. Baken

doi:10.1049/ip-j.1989.0043

Comparison of different modelling techniques for longitudinally invariant integrated optical waveguides

D. De Zutter, P. Lagasse, J. Buus, T. P. Young, B. M. Dillon, H. P. Nolting, C. Weinert, P. Di Vita, M. Potenza, P. A. Besse, J. S. Gu, A. Galtarossa, C. G. Someda, M. C. Amann, B. Borchert, N. H.G. Baken

Ghent University

Research output: Contribution to journal › Article › peer-review

46 Scopus citations

Abstract

In order to compare various modelling techniques for the eigenmode analysis of integrated optical waveguides, twelve different methods are applied to the analysis of two typical III-V rib waveguides. Both a single and a coupled waveguide case are considered. Results focus on the effective refractive index value for the lowest order TE-mode in the case of the single waveguide, and on the coupling length between the lowest order symmetric and antisymmetric TE-modes of the coupled waveguides. This paper is the result of the joint effort of thirteen research groups in the framwork of the Device Modelling group of the COST-216 project.

Original language	English
Pages (from-to)	273-280
Number of pages	8
Journal	IEE proceedings. Part J, Optoelectronics
Volume	136
Issue number	5
DOIs	https://doi.org/10.1049/ip-j.1989.0043
State	Published - 1989
Externally published	Yes

Access to Document

10.1049/ip-j.1989.0043

Cite this

De Zutter, D., Lagasse, P., Buus, J., Young, T. P., Dillon, B. M., Nolting, H. P., Weinert, C., Di Vita, P., Potenza, M., Besse, P. A., Gu, J. S., Galtarossa, A., Someda, C. G., Amann, M. C., Borchert, B., & Baken, N. H. G. (1989). Comparison of different modelling techniques for longitudinally invariant integrated optical waveguides. IEE proceedings. Part J, Optoelectronics, 136(5), 273-280. https://doi.org/10.1049/ip-j.1989.0043

@article{b29fd33213064170a6b5859075e787ac,

title = "Comparison of different modelling techniques for longitudinally invariant integrated optical waveguides",

abstract = "In order to compare various modelling techniques for the eigenmode analysis of integrated optical waveguides, twelve different methods are applied to the analysis of two typical III-V rib waveguides. Both a single and a coupled waveguide case are considered. Results focus on the effective refractive index value for the lowest order TE-mode in the case of the single waveguide, and on the coupling length between the lowest order symmetric and antisymmetric TE-modes of the coupled waveguides. This paper is the result of the joint effort of thirteen research groups in the framwork of the Device Modelling group of the COST-216 project.",

author = "{De Zutter}, D. and P. Lagasse and J. Buus and Young, {T. P.} and Dillon, {B. M.} and Nolting, {H. P.} and C. Weinert and {Di Vita}, P. and M. Potenza and Besse, {P. A.} and Gu, {J. S.} and A. Galtarossa and Someda, {C. G.} and Amann, {M. C.} and B. Borchert and Baken, {N. H.G.}",

year = "1989",

doi = "10.1049/ip-j.1989.0043",

language = "English",

volume = "136",

pages = "273--280",

journal = "IEE proceedings. Part J, Optoelectronics",

issn = "0267-3932",

publisher = "Institute of Electrical Engineers",

number = "5",

}

De Zutter, D, Lagasse, P, Buus, J, Young, TP, Dillon, BM, Nolting, HP, Weinert, C, Di Vita, P, Potenza, M, Besse, PA, Gu, JS, Galtarossa, A, Someda, CG, Amann, MC, Borchert, B & Baken, NHG 1989, 'Comparison of different modelling techniques for longitudinally invariant integrated optical waveguides', IEE proceedings. Part J, Optoelectronics, vol. 136, no. 5, pp. 273-280. https://doi.org/10.1049/ip-j.1989.0043

TY - JOUR

T1 - Comparison of different modelling techniques for longitudinally invariant integrated optical waveguides

AU - De Zutter, D.

AU - Lagasse, P.

AU - Buus, J.

AU - Young, T. P.

AU - Dillon, B. M.

AU - Nolting, H. P.

AU - Weinert, C.

AU - Di Vita, P.

AU - Potenza, M.

AU - Besse, P. A.

AU - Gu, J. S.

AU - Galtarossa, A.

AU - Someda, C. G.

AU - Amann, M. C.

AU - Borchert, B.

AU - Baken, N. H.G.

PY - 1989

Y1 - 1989

N2 - In order to compare various modelling techniques for the eigenmode analysis of integrated optical waveguides, twelve different methods are applied to the analysis of two typical III-V rib waveguides. Both a single and a coupled waveguide case are considered. Results focus on the effective refractive index value for the lowest order TE-mode in the case of the single waveguide, and on the coupling length between the lowest order symmetric and antisymmetric TE-modes of the coupled waveguides. This paper is the result of the joint effort of thirteen research groups in the framwork of the Device Modelling group of the COST-216 project.

AB - In order to compare various modelling techniques for the eigenmode analysis of integrated optical waveguides, twelve different methods are applied to the analysis of two typical III-V rib waveguides. Both a single and a coupled waveguide case are considered. Results focus on the effective refractive index value for the lowest order TE-mode in the case of the single waveguide, and on the coupling length between the lowest order symmetric and antisymmetric TE-modes of the coupled waveguides. This paper is the result of the joint effort of thirteen research groups in the framwork of the Device Modelling group of the COST-216 project.

UR - http://www.scopus.com/inward/record.url?scp=0024751446&partnerID=8YFLogxK

U2 - 10.1049/ip-j.1989.0043

DO - 10.1049/ip-j.1989.0043

M3 - Article

AN - SCOPUS:0024751446

SN - 0267-3932

VL - 136

SP - 273

EP - 280

JO - IEE proceedings. Part J, Optoelectronics

JF - IEE proceedings. Part J, Optoelectronics

IS - 5

ER -

Comparison of different modelling techniques for longitudinally invariant integrated optical waveguides

Abstract

Access to Document

Other files and links

Fingerprint

Cite this