A thermal simulation model for laser-assisted milling

M. F. Zaeh; R. Wiedenmann; R. Daub

doi:10.1016/j.phpro.2010.08.062

A thermal simulation model for laser-assisted milling

M. F. Zaeh, R. Wiedenmann, R. Daub

Technical University of Munich

Research output: Contribution to journal › Article › peer-review

27 Scopus citations

Abstract

Laser-assisted milling represents an innovative method to realize rough machining of hard-to-machine materials with less tool wear or an increased material removal rate. This paper describes experiments and simulations of locally heating the material with laser radiation to achieve a controlled heat impact. A simulation model is established using parameter variation of available material parameters. The influence of these parameters on the transient temperature field in the material is analyzed and an interrelation of laser and milling parameters is deduced.

Original language	English
Pages (from-to)	353-362
Number of pages	10
Journal	Physics Procedia
Volume	5
Issue number	PART 2
DOIs	https://doi.org/10.1016/j.phpro.2010.08.062
State	Published - 2010

Keywords

Laser-assisted
Milling
Processes
Surface treatment
Titanium

Access to Document

10.1016/j.phpro.2010.08.062

Cite this

@article{e64a4e1044134b2a93a0176840ff8363,

title = "A thermal simulation model for laser-assisted milling",

abstract = "Laser-assisted milling represents an innovative method to realize rough machining of hard-to-machine materials with less tool wear or an increased material removal rate. This paper describes experiments and simulations of locally heating the material with laser radiation to achieve a controlled heat impact. A simulation model is established using parameter variation of available material parameters. The influence of these parameters on the transient temperature field in the material is analyzed and an interrelation of laser and milling parameters is deduced.",

keywords = "Laser-assisted, Milling, Processes, Surface treatment, Titanium",

author = "Zaeh, {M. F.} and R. Wiedenmann and R. Daub",

note = "Funding Information: The presented results were developed within a research project on laser-assisted milling of advanced materials supported by “Pokolm Fr{\"a}stechnik GmbH & Co. KG” and the “Bundesministerium f{\"u}r Bildung und Forschung” (BMBF).",

year = "2010",

doi = "10.1016/j.phpro.2010.08.062",

language = "English",

volume = "5",

pages = "353--362",

journal = "Physics Procedia",

issn = "1875-3884",

publisher = "Elsevier B.V.",

number = "PART 2",

}

TY - JOUR

T1 - A thermal simulation model for laser-assisted milling

AU - Zaeh, M. F.

AU - Wiedenmann, R.

AU - Daub, R.

N1 - Funding Information: The presented results were developed within a research project on laser-assisted milling of advanced materials supported by “Pokolm Frästechnik GmbH & Co. KG” and the “Bundesministerium für Bildung und Forschung” (BMBF).

PY - 2010

Y1 - 2010

N2 - Laser-assisted milling represents an innovative method to realize rough machining of hard-to-machine materials with less tool wear or an increased material removal rate. This paper describes experiments and simulations of locally heating the material with laser radiation to achieve a controlled heat impact. A simulation model is established using parameter variation of available material parameters. The influence of these parameters on the transient temperature field in the material is analyzed and an interrelation of laser and milling parameters is deduced.

AB - Laser-assisted milling represents an innovative method to realize rough machining of hard-to-machine materials with less tool wear or an increased material removal rate. This paper describes experiments and simulations of locally heating the material with laser radiation to achieve a controlled heat impact. A simulation model is established using parameter variation of available material parameters. The influence of these parameters on the transient temperature field in the material is analyzed and an interrelation of laser and milling parameters is deduced.

KW - Laser-assisted

KW - Milling

KW - Processes

KW - Surface treatment

KW - Titanium

UR - http://www.scopus.com/inward/record.url?scp=79551718689&partnerID=8YFLogxK

U2 - 10.1016/j.phpro.2010.08.062

DO - 10.1016/j.phpro.2010.08.062

M3 - Article

AN - SCOPUS:79551718689

SN - 1875-3884

VL - 5

SP - 353

EP - 362

JO - Physics Procedia

JF - Physics Procedia

IS - PART 2

ER -

A thermal simulation model for laser-assisted milling

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this