A numerical approach to the calculation of the surface temperature distribution of worm gears

Philipp Roth; Werner Sigmund; Sebastian Born; Daniel Kadach; Karsten Stahl

doi:10.1115/DETC201767049

A numerical approach to the calculation of the surface temperature distribution of worm gears

Philipp Roth, Werner Sigmund, Sebastian Born, Daniel Kadach, Karsten Stahl

Chair of Machine Elements

Technical University of Munich

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Abstract

This paper presents a numerical approach to calculate the distribution of the surface temperature of worm gears, which is needed to determine the scuffing load capacity. The simulation model used for the heat transport as well as its boundary conditions are explained. Exemplary results for various operating conditions and temperature courses over time are presented. A comparison of the simulation model with another model from literature reveals deviating results. It is shown that the deviations can be attributed to limitations of the model from literature. These limitations do not apply to the numerical simulation model that is presented in this paper.

Original language	English
Title of host publication	2017 ASME International Power Transmission and Gearing Conference
Publisher	American Society of Mechanical Engineers (ASME)
ISBN (Electronic)	9780791858240
DOIs	https://doi.org/10.1115/DETC201767049
State	Published - 2017
Event	ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2017 - Cleveland, United States Duration: 6 Aug 2017 → 9 Aug 2017

Publication series

Name	Proceedings of the ASME Design Engineering Technical Conference
Volume	10

Conference

Conference	ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2017
Country/Territory	United States
City	Cleveland
Period	6/08/17 → 9/08/17

Access to Document

10.1115/DETC201767049

Cite this

Roth, P., Sigmund, W., Born, S., Kadach, D., & Stahl, K. (2017). A numerical approach to the calculation of the surface temperature distribution of worm gears. In 2017 ASME International Power Transmission and Gearing Conference (Proceedings of the ASME Design Engineering Technical Conference; Vol. 10). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC201767049

@inproceedings{e0a471dd7123404894de449c2baf837d,

title = "A numerical approach to the calculation of the surface temperature distribution of worm gears",

abstract = "This paper presents a numerical approach to calculate the distribution of the surface temperature of worm gears, which is needed to determine the scuffing load capacity. The simulation model used for the heat transport as well as its boundary conditions are explained. Exemplary results for various operating conditions and temperature courses over time are presented. A comparison of the simulation model with another model from literature reveals deviating results. It is shown that the deviations can be attributed to limitations of the model from literature. These limitations do not apply to the numerical simulation model that is presented in this paper.",

author = "Philipp Roth and Werner Sigmund and Sebastian Born and Daniel Kadach and Karsten Stahl",

note = "Publisher Copyright: {\textcopyright} 2017 ASME.; ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2017 ; Conference date: 06-08-2017 Through 09-08-2017",

year = "2017",

doi = "10.1115/DETC201767049",

language = "English",

series = "Proceedings of the ASME Design Engineering Technical Conference",

publisher = "American Society of Mechanical Engineers (ASME)",

booktitle = "2017 ASME International Power Transmission and Gearing Conference",

}

Roth, P, Sigmund, W, Born, S, Kadach, D & Stahl, K 2017, A numerical approach to the calculation of the surface temperature distribution of worm gears. in 2017 ASME International Power Transmission and Gearing Conference. Proceedings of the ASME Design Engineering Technical Conference, vol. 10, American Society of Mechanical Engineers (ASME), ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2017, Cleveland, United States, 6/08/17. https://doi.org/10.1115/DETC201767049

A numerical approach to the calculation of the surface temperature distribution of worm gears. / Roth, Philipp; Sigmund, Werner; Born, Sebastian et al.
2017 ASME International Power Transmission and Gearing Conference. American Society of Mechanical Engineers (ASME), 2017. (Proceedings of the ASME Design Engineering Technical Conference; Vol. 10).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A numerical approach to the calculation of the surface temperature distribution of worm gears

AU - Roth, Philipp

AU - Sigmund, Werner

AU - Born, Sebastian

AU - Kadach, Daniel

AU - Stahl, Karsten

PY - 2017

Y1 - 2017

N2 - This paper presents a numerical approach to calculate the distribution of the surface temperature of worm gears, which is needed to determine the scuffing load capacity. The simulation model used for the heat transport as well as its boundary conditions are explained. Exemplary results for various operating conditions and temperature courses over time are presented. A comparison of the simulation model with another model from literature reveals deviating results. It is shown that the deviations can be attributed to limitations of the model from literature. These limitations do not apply to the numerical simulation model that is presented in this paper.

AB - This paper presents a numerical approach to calculate the distribution of the surface temperature of worm gears, which is needed to determine the scuffing load capacity. The simulation model used for the heat transport as well as its boundary conditions are explained. Exemplary results for various operating conditions and temperature courses over time are presented. A comparison of the simulation model with another model from literature reveals deviating results. It is shown that the deviations can be attributed to limitations of the model from literature. These limitations do not apply to the numerical simulation model that is presented in this paper.

UR - http://www.scopus.com/inward/record.url?scp=85034636041&partnerID=8YFLogxK

U2 - 10.1115/DETC201767049

DO - 10.1115/DETC201767049

M3 - Conference contribution

AN - SCOPUS:85034636041

T3 - Proceedings of the ASME Design Engineering Technical Conference

BT - 2017 ASME International Power Transmission and Gearing Conference

PB - American Society of Mechanical Engineers (ASME)

T2 - ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2017

Y2 - 6 August 2017 through 9 August 2017

ER -

A numerical approach to the calculation of the surface temperature distribution of worm gears

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this