Klaus Drechsler

2024

Biomechanical Joint Design of Patient-Specific Rehabilitative Knee Exoskeletons for Misalignment Correction

Chen, C. Y., Frejat, J. M., Vaidyanathan, R. & Drechsler, K., 2024, 2024 10th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics, BioRob 2024. IEEE Computer Society, p. 801-805 5 p. (Proceedings of the IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2022

AUTOMATED DETECTION OF YARN GAPS DURING RADIAL BRAIDING OF CARBON FIBER BY MEANS OF LIGHT BARRIERS

Maidl, S., Putze, L., Kind, K. & Drechsler, K., 2022, Manufacturing. Vassilopoulos, A. P. & Michaud, V. (eds.). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), p. 137-144 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

COMPARING MEASUREMENT TECHNIQUES FOR THE CHARACTERISTICS OF LAY-UP DEFECTS IN THE AFP PROCESS USING 3D LASER SENSOR DATA

Diemar, F., Campoy, M. K., Böckl, B. & Drechsler, K., 2022, Manufacturing. Vassilopoulos, A. P. & Michaud, V. (eds.). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), p. 88-95 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

DETAILED MICROSTRUCTURE CHARACTERISATION OF 3D PRINTED CARBON-FIBRE/PEEK USING X-RAY COMPUTED TOMOGRAPHY

Sommacal, S., Holmes, J., Matschinski, A., Drechsler, K. & Compston, P., 2022, Characterization. Vassilopoulos, A. P. & Michaud, V. (eds.). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), p. 644-651 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

DEVELOPMENT OF A MANUFACTURING PROCESS FOR A CUBOIDAL PRESSURE VESSEL WITH TENSION STRUTS

Gleis, E., Kim, J., Zaremba, S. & Drechsler, K., 2022, Applications and Structures. Vassilopoulos, A. P. & Michaud, V. (eds.). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), p. 335-342 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 5).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

DEVELOPMENT OF AN EXPERIMENTAL SETUP TO DETERMINE THE PERMEABILITY OF A SINGLE TOW

Steinhardt, M., Böckl, B., Denk, A., Techmer, D., Bublitz, D. & Drechsler, K., 2022, Manufacturing. Vassilopoulos, A. P. & Michaud, V. (eds.). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), p. 1006-1012 7 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

EXPERIMENTAL STUDY ON THE STRUCTURAL DAMPING OF FIBER-FILLED HOLLOW PROFILES

Regner, S., Ehrig, T., Modler, N., Grosser, K., Drechsler, K., Sentpali, S. & Dannemann, M., 2022, Proceedings of the 28th International Congress on Sound and Vibration, ICSV 2022. Society of Acoustics, (Proceedings of the International Congress on Sound and Vibration).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

IMPROVING MECHANICAL PROPERTIES WITH AFP-BASED FIBER ARCHITECTURE

Schuster, J., Chatzigeorgiou, L. & Drechsler, K., 2022, Manufacturing. Vassilopoulos, A. P. & Michaud, V. (eds.). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), p. 1060-1067 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

INFLUENCE OF THE BINDER ON COMPACTION, SHEAR AND FRICTION FOR CARBON FIBER PREFORMS IN THE RTM-PROCESS

Schauer, C., Ongaki, B., Bublitz, D. & Drechsler, K., 2022, Composites and Advanced Materials Expo, CAMX 2022. The Composites and Advanced Materials Expo (CAMX), TP22-0000000019. (Composites and Advanced Materials Expo, CAMX 2022).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

NON-PLANAR SLICING METHOD FOR MAXIMIZING THE ANISOTROPIC BEHAVIOR OF CONTINUOUS FIBER-REINFORCED FUSED FILAMENT FABRICATED PARTS

Chen, C. Y., Freißmuth, L., Altug, S. M., Colin, D., Feuchtgruber, M. & Drechsler, K., 2022, Additive Manufacturing; Biomanufacturing; Life Cycle Engineering; Manufacturing Equipment and Automation; Nano/Micro/Meso Manufacturing. American Society of Mechanical Engineers, V001T01A002. (Proceedings of ASME 2022 17th International Manufacturing Science and Engineering Conference, MSEC 2022; vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

NUMERICAL SIMULATION OF MICROSCALE CRACK PROPAGATION IN GLASS-EPOXY COMPOSITES USING DISCRETE FIBRES, MATRIX AND INTERFACE

Seidel, A., Khudiakova, A., Bublitz, D. & Drechsler, K., 2022, Modeling and Prediction. Vassilopoulos, A. P. & Michaud, V. (eds.). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), p. 9-16 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 4).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Towards a Holistic Approach for an Efficient Determination of the Rheological Behavior of Sheet Molding Compounds for Process Simulation

Imbsweiler, A. J., Shinoura, Y., Colin, D., Zaremba, S. & Drechsler, K., 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). Trans Tech Publications Ltd, p. 1864-1873 10 p. (Key Engineering Materials; vol. 926 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

2021

Analysis for understanding and standardization of additive manufacturing processes

Matschinski, A., Osswald, T. & Drechsler, K., 2021, ESAFORM 2021 - 24th International Conference on Material Forming. PoPuPS (University of LiFge Library), 2495. (ESAFORM 2021 - 24th International Conference on Material Forming).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

2020

Development of a novel type of online monitoring system for the braiding process

Maidl, S., Mierzwa, A., Ebel, C. & Drechsler, K., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Influence of prepreg aging and tack on lay-up effects/defects in thermoset automated fiber placement

Heller, K., Böckl, B., Ebel, C. & Drechsler, K., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Material characterization for compression resin transfer molding process simulation

Vollmer, M., Tagscherer, N., Zaremba, S., Schultheiß, D., Mertiny, P. & Drechsler, K., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Online monitoring system for the tack of prepreg slit tapes used in automated fiber placement

Böckl, B., Jetten, C., Heller, K., Ebel, C. & Drechsler, K., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

2019

Analysis of a process approach for production of triaxial braids with locally customized filler yarn count

Eschler, E., Hüls, J., Zaremba, S. & Drechsler, K., 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications Ltd, p. 360-366 7 p. (Key Engineering Materials; vol. 809 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Automatic detection of the nasal cavities and paranasal sinuses using deep neural networks

Laura, C. O., Hofmann, P., Drechsler, K. & Wesarg, S., Apr 2019, ISBI 2019 - 2019 IEEE International Symposium on Biomedical Imaging. IEEE Computer Society, p. 1154-1157 4 p. 8759481. (Proceedings - International Symposium on Biomedical Imaging; vol. 2019-April).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

14 Scopus citations

Experimental analysis of the compaction behavior of thermoset prepreg tapes during automated fiber placement

Engelhardt, R., Brath, K., Ebel, C. & Drechsler, K., 2019, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Experimental characterization of the fiber angles of multiple curved laminate segments using prepreg-based carbon fiber reinforced polymers as a structure for a non-engaging bellows coupling

Oblinger, C., Baeten, A. & Drechsler, K., 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications Ltd, p. 555-562 8 p. (Key Engineering Materials; vol. 809 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Influence of the production parameters on the transversal permeability of preforms produced with automated fibre placement

Graupner, R. & Drechsler, K., 2019, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Near-net-shape rigid foam cores for CFRP sandwich composites made from polyethylene terephthalate using thermoforming

Schütte, J., Müller, S. & Drechsler, K., 22 Jan 2019, Proceedings of the Europe/Africa Conference Dresden 2017 - Polymer Processing Society PPS. Gehde, M., Wagenknecht, U., Wiessner, S. & Potschke, P. (eds.). American Institute of Physics Inc., 060008. (AIP Conference Proceedings; vol. 2055).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

1 Scopus citations

Thermoplastic multi-material nonwovens from recycled carbon fibres using wet-laying technology

Sauer, M., Feil, J., Manis, F., Betz, T. & Drechsler, K., 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications Ltd, p. 210-216 7 p. (Key Engineering Materials; vol. 809 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

2018

Comparison of validation methods for forming simulations

Schug, A., Kapphan, G., Bardl, G., Hinterhölzl, R. & Drechsler, K., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Buffa, G., Fratini, L., Ingarao, G. & Di Lorenzo, R. (eds.). American Institute of Physics Inc., 020028. (AIP Conference Proceedings; vol. 1960).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

2017

Calibration and uncertainty of a fibre optic measurement system for Fresnel reflectometer sensors

Oelhafen, J., Mayr, T., Moutzouris, K., Roths, J. & Drechsler, K., 2017, 25th International Conference on Optical Fiber Sensors. Yuan, L., Chung, Y., Jin, W., Lee, B., Canning, J. & Nakamura, K. (eds.). SPIE, 103235O. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10323).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Numerical analysis on the structural behavior of a non-engaging CFRP bellows coupling for propulsion technology

Oblinger, C., Baeten, A. & Drechsler, K., 2017, 21st Symposium on Composites, 2017. Herrmann, A. S. (ed.). Trans Tech Publications Ltd, p. 723-731 9 p. (Key Engineering Materials; vol. 742 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Properties of second life carbon fibre reinforced polymers

Manis, F., Schmieg, M., Sauer, M. & Drechsler, K., 2017, 21st Symposium on Composites, 2017. Herrmann, A. S. (ed.). Trans Tech Publications Ltd, p. 562-567 6 p. (Key Engineering Materials; vol. 742 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Thermoforming of glass fibre reinforced polypropylene: A study on the influence of different process parameters

Schug, A., Winkelbauer, J., Hinterhölzl, R. & Drechsler, K., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. Brabazon, D., Ul Ahad, I. & Naher, S. (eds.). American Institute of Physics Inc., 030010. (AIP Conference Proceedings; vol. 1896).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

8 Scopus citations

2016

Bending characterization of axis and off-axis fiber-reinforced hinges at large deflection

Krollmann, J., Colin, D., Avila Gray, L., Zaremba, S. & Drechsler, K., 2016, SAMPE Long Beach 2016 Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference; vol. 2016-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Challenges for Thermoplastic-Automated Fiber Placement (TP-AFP) with in situ consolidation on 3D parts

Kollmannsberger, A., Ladstätter, E. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Clinical image-based procedures: Translational research in medical imaging: 4th international workshop, CLIP 2015 held in conjunction with MICCAI 2015 Munich, Germany, october 5, 2015 revised selected papers

Laura, C. O., Shekhar, R., Wesarg, S., Ballester, M. Á. G., Drechsler, K., Sato, Y., Erdt, M. & Linguraru, M. G., 2016, Clinical Image-Based Procedures: Translational Research in Medical Imaging - 4th International Workshop, CLIP 2015, Held in Conjunction with MICCAI 2015, Revised Selected Papers. Laura, C. O., Wesarg, S., Drechsler, K., Shekhar, R., Linguraru, M. G., Ballester, M. Á. G., Sato, Y. & Erdt, M. (eds.). Springer Verlag, (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9401).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Direct adhesion of CFR-thermoplast on steel - Testing and simulation of the lap shear fracture

Yüksel, F., Hinterhölzl, R. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Effect of different technological and energy supply related measures on the primary energy demand of CFRP production

Wehner, D., Hohmann, A., Schwab, B., Albrecht, S., Ilg, R., Sedlbauer, K., Leistner, P. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Effects of automated patch placement on the mechanical performance of reformed NCF carbon fibre

Snudden, J. P., Horn, B., Ward, C., Potter, K. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Effects of differently impregnated carbon fiber reinforced tapes with polyamide 6 on further processing

Radlmaier, V., Baumann, H., Brudzinski, P. V., Erber, A., Koerber, H. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Energy efficiency and ecological benefits of a self-heated CFRP tool designed for resin transfer moulding

Arikan, E., Hohmann, A., Kammerhofer, P., Reppe, M., Remer, N. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Experimental analysis of gaps and overlaps caused by intra-ply sectorization in the thermoplastic automated fiber placement process

Zenker, T., Schuerger, C. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Experimental and simulation study on the performance of Fiber Patch Placement (FPP)

Majic, N., Weidinger, H., Michl, F. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Experimental investigation of inter-layer thermal contact resistance and its relevance for consolidation of thermoplastic composites

Schaefer, P. M., Kreuzhage, S., Zaremba, S. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Experimental investigation of the radius forming behavior of fiber reinforced thermoplastics

Schug, A., Hinterhölzl, R. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Hybrid-matrix processing: How to co-inject multiple resin systems into one composite part?

Krollmann, J., Alvarado, C. S., Carqueville, P., Snajdr, R., Zaremba, S. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Hybrid structures of metals and fiber reinforced thermoplastics for chassis components

Tenhaeff, K. A. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Scopus citations

Influence of braid set up and roving size to mechanical properties of biaxial carbon fiber braids

Brand, M., Ladstätter, E. & Drechsler, K., 31 Oct 2016, Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS: Conference Papers. Holzer, C. H. & Payer, M. (eds.). American Institute of Physics Inc., 120003. (AIP Conference Proceedings; vol. 1779).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

1 Scopus citations

In-situ detection of phase transitions of semi-crystalline carbon fiber reinforced thermoplastics using dielectric analysis and its correlation to DMA and DSC

Chaloupka, A., Grund, D., Wedel, A., Rudolph, N. M. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Integrated simulation approach for structural analysis of composite components considering process simulation data

Mayer, N., Prowe, J., Havar, T., Hinterhölzl, R. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Investigation of thermal ageing of advanced CFRP tooling laminate by gas permeability

Kammerhofer, P., Zaremba, S. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Investigation on creation of fibrous rings and their influence on the braided preform quality

Mierzwa, A., Ebel, C., Harbers, T. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Scopus citations

Manufacturing CFRP sandwich parts using wet moulding

Schuette, J., Hoffmann, J., Ladstaetter, E. & Drechsler, K., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

New production process for manufacturing continuous fiber-reinforced thermoplastic hollow profile components

Stefanziosa, C., Drechsler, K., Ladstätter, E. & Zimmermann, T., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Klaus Drechsler

Research output

Search results