Solder Bumping for flip-chips with an electro-magnetic actuator

O. S. Kessling, F. Irlinger, T. C. Lueth

Publikation: Beitrag in Buch/Bericht/KonferenzbandKonferenzbeitragBegutachtung

1 Zitat (Scopus)

Abstract

This paper reports an actuator for printing solder. Different types of solder can be printed: Sn63Pb37, Sn100, Sn96Ag4, and Sn97Cu3. The primary application of the print head is the field of flip-chip bumping. The advantage in this case is the flexible generation of solder balls on a circuit board without the need of using a screen printing mask. Measurements of printed solder bumps approve the functionality of the print head. A test layout for the placement of flip-chips is printed and the diameter and the height of the bumps are measured. The standard deviation is calculated in order to approve the repeatability of the process. In addition first solder columns, in order to reduce the thermal stress of the chip are printed. First chips were placed and the functionality of the chip substrate interconnection was verified.

OriginalspracheEnglisch
TitelProceedings - 2008 2nd Electronics Systemintegration Technology Conference, ESTC
Seiten981-984
Seitenumfang4
DOIs
PublikationsstatusVeröffentlicht - 2008
Veranstaltung2008 2nd Electronics Systemintegration Technology Conference, ESTC - Greenwich, Großbritannien/Vereinigtes Königreich
Dauer: 1 Sept. 20084 Sept. 2008

Publikationsreihe

NameProceedings - 2008 2nd Electronics Systemintegration Technology Conference, ESTC

Konferenz

Konferenz2008 2nd Electronics Systemintegration Technology Conference, ESTC
Land/GebietGroßbritannien/Vereinigtes Königreich
OrtGreenwich
Zeitraum1/09/084/09/08

Fingerprint

Untersuchen Sie die Forschungsthemen von „Solder Bumping for flip-chips with an electro-magnetic actuator“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren