Characteristics of a corrugated tapered slot antenna with dielectric rod and metallic reflector

Alexander Hees, Jürgen Hasch, Jürgen Detlefsen

Publikation: Beitrag in Buch/Bericht/KonferenzbandKonferenzbeitragBegutachtung

5 Zitate (Scopus)

Abstract

A novel ultrawideband (UWB) tapered slot antenna with high directivity is presented. It operates in the frequency range from 2.2 GHz up to 8.5 GHz. The antenna consists of three parts. As feed, a tapered slot on a PCB is used. Additional corrugations at the lateral metallic borders of the tapered structure lead to reduced side lobe levels and a flat gain in the main direction. The PCB is inserted into a cylindrical dielectric rod to increase the directivity. Finally a metallic reflector is added at the back of the antenna structure to reduce the backward radiation. With this design, a mean gain of 9 dBi and a stable main beam direction with a nearly constant 3 dB beam width, both in the E- and H-plane, were achieved. The antenna shows excellent time domain behavior with a high and sharp peak as well as low ringing of the impulse response.

OriginalspracheEnglisch
TitelProceeedings of The 2008 IEEE International Conference on Ultra-Wideband, ICUWB 2008
Seiten1-4
Seitenumfang4
DOIs
PublikationsstatusVeröffentlicht - 2008
Veranstaltung2008 IEEE International Conference on Ultra-Wideband, ICUWB 2008 - Hannover, Deutschland
Dauer: 10 Sept. 200812 Sept. 2008

Publikationsreihe

NameProceeedings of The 2008 IEEE International Conference on Ultra-Wideband, ICUWB 2008
Band1

Konferenz

Konferenz2008 IEEE International Conference on Ultra-Wideband, ICUWB 2008
Land/GebietDeutschland
OrtHannover
Zeitraum10/09/0812/09/08

Fingerprint

Untersuchen Sie die Forschungsthemen von „Characteristics of a corrugated tapered slot antenna with dielectric rod and metallic reflector“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren