A low-noise realtime time-domain EMI measurement system

Stephan Braun, Arnd Frech, Peter Russer

Publikation: Beitrag in Buch/Bericht/KonferenzbandKonferenzbeitragBegutachtung

6 Zitate (Scopus)

Abstract

Time-domain EMI Measurement Systems allow to reduce the measurement time by several orders of magnitude. In this paper a realtime operating low-noise multiresolution time-domain EMI measurement system is presented. With a noise figure of about 7.5 dB and a high dynamic range emission measurements can be carried out close to the noise floor, while a high overload protection is available. A novel implementation of the 9 kHz IF-filter for the frequency 150 kHz to 1 GHz is presented. By this way the measurement time has been reduced by a factor of 8000 in comparison to conventional EMI Receivers. During emission measurements performed with a modelled IF-bandwidth of 9 kHz the noise floor is decreased to -19 dμV in the average detector mode.Measurements have been performed with the improved measurement system in the frequency range 30 MHz - 1 GHz.

OriginalspracheEnglisch
TitelProceedings of the 18th International Zurich Symposium on Electromagnetic Compatibility, EMC
Seiten381-384
Seitenumfang4
DOIs
PublikationsstatusVeröffentlicht - 2007
Veranstaltung18th International Zurich Symposium on Electromagnetic Compatibility, EMC - Munich, Deutschland
Dauer: 24 Sept. 200728 Sept. 2007

Publikationsreihe

NameProceedings of the 18th International Zurich Symposium on Electromagnetic Compatibility, EMC

Konferenz

Konferenz18th International Zurich Symposium on Electromagnetic Compatibility, EMC
Land/GebietDeutschland
OrtMunich
Zeitraum24/09/0728/09/07

Fingerprint

Untersuchen Sie die Forschungsthemen von „A low-noise realtime time-domain EMI measurement system“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren